COVINAX 525-66 DEV is a surfactant stabilized vinyl acrylic copolymer emulsion developed for high performance permanent pressure sensitive adhesive applications. It has an excellent balance of peel adhesion and shear adhesion. COVINAX 525-66 DEV is internally cross linked, giving it superior cohesive strength. In addition, it has been tested on vinyl film used in digital graphics applications and exhibits good plasticizer migration resistance. It will resist cold flow and will die cut and convert well, giving dry edges to finished sheets and rolls.
Polymer Type: Vinyl Modified Acrylic Copolymer Protective System: Anionic Color: White Viscosity (cps): 800 - 1100 (RVF, Spindle #3/20 RPM /77° F) Percent Solids (%): 54.0 - 57.5 pH: 4.8 - 5.8 Weight Per Gallon: 8.7 Borax Compatible: Yes Glass Transition Temperature (Tg):(DSC): -37.6°C
A 1 mil (28g/m2) dry film of COVINAX 525-66 DEV cast directly onto 1 mil thickness polyester film will exhibit the following average performance properties when tested on #304 stainless steel, which has a #3 surface finish. Test Typical Values Specification Range 180° Peel Adhesion1 (lb) 2.3 1.6 minimum 178° Shear Adhesion2 (minutes) 940 330 minimum Loop Tack3 (lb) 1.8 1.0 minimum
Minimum Application Temperature: >32°F N/A Service (Use) Temperature: 20°F to 250°F N/A
NOTE: Minimum application and service temperatures are dependent upon many factors including face stock, adhesive coat weight, adhesion, and intended application. We can only offer an estimate based on the Tg and typical performance properties of the adhesive.
Shelf life: Best if used within three months of date of manufacture. Mix before use for best results. Product is not freeze/thaw stable.
For additional questions, Franklin’s technical service team is available at 1.800.877.4583. 24/7 technical service is available online at www.franklinadhesivesandpolymers.com.
IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods of use of our product by Customer are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale. All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at http://www.franklini.com/Terms_and_Conditions.aspx (“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale. © Copyright 2023. All rights reserved. Franklin International. Revised 02/02/2023.